Simulation of mode II unconstrained fracture path formation coupled with continuum anisotropic damage propagation in shale
Abstract
The objective of this work is to simulate mode II multi-scale fracture propagation in shale by coupling a continuum anisotropic damage model with a Cohesive Zone Model (CZM). The Continuum Damage Mechanics – based Differential Stress Induced Damage (DSID) model is used to represent micro-scale crack evolution. DSID parameters were calibrated against pre-peak points of stress/strain curves obtained experimentally during triaxial compression tests performed in Bakken shale. A bilinear CZM is employed to represent macroscale fracture propagation. We calculated the effective shear modulus of a continuum that contained a distribution of parallel cracks according to the DSID model (which does not account for crack interactions) and according to Kachanov’s micromechanical model (which accounts for crack interactions). Simulations confirmed that above a crack density or damage of 0.3, crack interactions could not be ignored, and we used that threshold to define the transition between continuum damage propagation and discrete fracture propagation and subsequently, to calibrate the shear cohesive strength of the CZM. The CZM cohesive energy release rate was determined by calibrating a numerical model of triaxial compression test against experimental data obtained on Bakken shale. The cylindrical sample was modeled with a CZM to pre-define an inclined cohesive fracture, and the DSID model was assigned to the surrounding elements. We used our calibrated CZM-DSID model to simulate a biaxial compression test in plane strain. Results clearly show that the proposed modeling strategy not only allows simulating the advancement of macro-fracture tips, but also captures the inception and growth of micro-cracks that form damaged zones, as well as the transition between smeared damage and discrete fracture.
Wencheng Jin
Assistant Professor of Petroleum Engineering
My research interests include novel rock breakage and fracture for subsurface resource recovery, data-driven and physics-based multiphysics modeling in porous and fractured media, and granular material flow characterization and modeling. My research provides solutions for energy/minerals recovery & storage, material handling, and GeoHazards prediction.